HOME PAGE ABOUT US PRODUCTS SOURCE REFERENCES CONTACT US
 
Single Water Softener Systems Home » Products » WATER TREATMENT » Water Softening Systems (Timed Control) » Single Water Softener Systems
 
   
  • Description
  • Request Detailed Information

SINGLE WATER SOFTENER SYSTEMS

Water softening process is performed with the ion exchange method. Ion exchange, which causes hardening of water containing calcium and magnesium ions in the sodium form by passing a cationic resin is carried out. Sodium-based cationic resin in the hard water passes through the hardness ions (Ca +2 and Mg +2); connected to the resin is replaced by Na + ions.
A certain quantity of hard water after passing through the resin bed, resin pellets completely hardening minerals are coated with. In this case the ends of hardness minerals. Hardness ions, resin particles in order to hold back water hardness minerals sodium particles and free of the need to be connected again. This processing 'regeneration' is called. The process of regeneration, backwash, brine absorption, slow rinse, fast rinse and brine refill consists of 5 main steps including. Completion of step 5 of the resin, calcium (Ca2 +) and magnesium (Mg2 +) ions while releasing sodium (Na +) ions back to itself and is ready to the service position.

Water softening units designed to be incorporated into the resin tank while the amount of raw water to the character of the resin, depending on the average daily water consumption and peak flow rate is calculated. Also the regeneration process, time-controlled, flow-controlled or hardness analyzer measuring the output depending on the water hardness may be provided as automated.

Name Surname :
E-mail :
Telephone :
Your Message :
   
 
designed by emrahduzer.com